Description
Stromberg E-Fire High Performance spark plug wires are designed for flathead Ford applications—whether you have a front mount (59A) or top mount (8BA) distributor. Designed to work with both electronic and points-style distributors, E-FIRE plug wires give you strong fire power with high-level RFI/EMI resistance. The spiral-wound, stainless steel suppression core is protected by tough fiberglass reinforcing braid for strength and flexibility. And the 100 percent silicone insulation resists high temperatures, moisture, oil and chemicals, and protects against arcing and voltage leaks. With low 500 Ohm/ft resistance, they get more energy into your plugs.
With the Ford flathead engine firmly in mind, Stromberg designed the 90-degree cap terminals and boots to be pre-fitted for smarter 'distributor first' installation. This eliminates the difficult task of trimming front mount wires up close to the radiator where access is limited—and also leaves you free to use the supplied 90-degree spark plug boots or choose your own hot rod terminals. All leads are 7mm diameter, so they fit through your flathead plug wire looms or tubes. They're cut to length, too, with a long coil wire to reach your firewall.
Brand: Stromberg Carburetors
Manufacturer's Part Number: 9705K
Part Type: Spark Plug Wire Sets
Product Line: Stromberg E-Fire High Performance Spark Plug Wires
HP Direct Part Number: SBC-9705K
Assembled: No
Distributor Terminal Type: Female/Socket
Distributor Boot Color: Black
Distributor Boot Material: Silicone
Spark Plug Boot Ends: Eight 90 degree
Spark Plug Boot Color: Black
Spark Plug Boot Material: Silicone
Diameter (mm): 7.00mm
Wire Color: Black
RFI Suppression: No
Coil Wire Included: Yes
Conductor Style: Spiral core
Spark Plug Wire Resistance: 5,000 ohms/ft.
Quantity: Sold as a set.
Notes: Fits front mount 21A "crab cap" distributors (e-Fire and OE) and 1949-53 8B distributors. Does not fit Ford early style caps or modern caps with male, HEI-type bullet terminals.
With the Ford flathead engine firmly in mind, Stromberg designed the 90-degree cap terminals and boots to be pre-fitted for smarter 'distributor first' installation. This eliminates the difficult task of trimming front mount wires up close to the radiator where access is limited—and also leaves you free to use the supplied 90-degree spark plug boots or choose your own hot rod terminals. All leads are 7mm diameter, so they fit through your flathead plug wire looms or tubes. They're cut to length, too, with a long coil wire to reach your firewall.
Brand: Stromberg Carburetors
Manufacturer's Part Number: 9705K
Part Type: Spark Plug Wire Sets
Product Line: Stromberg E-Fire High Performance Spark Plug Wires
HP Direct Part Number: SBC-9705K
Assembled: No
Distributor Terminal Type: Female/Socket
Distributor Boot Color: Black
Distributor Boot Material: Silicone
Spark Plug Boot Ends: Eight 90 degree
Spark Plug Boot Color: Black
Spark Plug Boot Material: Silicone
Diameter (mm): 7.00mm
Wire Color: Black
RFI Suppression: No
Coil Wire Included: Yes
Conductor Style: Spiral core
Spark Plug Wire Resistance: 5,000 ohms/ft.
Quantity: Sold as a set.
Notes: Fits front mount 21A "crab cap" distributors (e-Fire and OE) and 1949-53 8B distributors. Does not fit Ford early style caps or modern caps with male, HEI-type bullet terminals.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.