FiTech Go EFI 4 Power Adder 600 HP Self-Tuning Fuel Injection Systems 31006

If you're running a supercharger, blower, or nitrous, and want to ditch the carburetor, you'll need a FiTech Go EFI 4 Power Adder 600 hp self-tuning fuel injection system. These units mount the self-adjusting ECU on the throttle body, fit any 4-barrel intake manifold, and are designed to support 250 to 600 hp engines. Each system has a hand-held controller with a touch screen for initial setup, a throttle linkage that suits most transmissions, and is manufactured with OE engineering. Models are available with or without a fuel pump. Increased performance is at hand with FiTech Go EFI 4 Power Adder 600 hp self-tuning fuel injection systems.

Additional Go EFI 4 Power Adder features:

* Throttle body is boost-ready
* Can change air/fuel ratios and ignition timing on-the-fly
* Choice of three fuel inlet connections
* Will work with CDI box, but not required to control timing
* Two adjustable fan control switches
* Can be used with an engine-mounted returnless fuel command center
* Uses easy-to-replace, GM-type sensors and Bosch 4.2 wideband oxygen sensors
* Wet flow swirl spray annual discharge obtains complete atomization
* Built-in pressure regulator
* Voltage-controlling fuel pump control reduces power under low loads to lower temperatures
* Nitrous and boost timing retard strategies and target A/F options
* Air conditioning idle speed input kick-up
* Many safety features and accessories for nitrous tuning control
* Can handle 25 lbs. of boost from a blow-through turbo, blower, or single roots supercharger—and can also take a single stage of wet nitrous
* Complete tuning from Pro Laptop software
* Systems with mounted ECUs offer spark control without the need for an external spark box or special distributor
* Designed for applications making at least 6 in. of vacuum at idle
Brand: FiTech Fuel Injection
Manufacturer's Part Number: 31006
Part Type: Fuel Injection Systems
Product Line: FiTech Go EFI 4 Power Adder 600 HP Self-Tuning Fuel Injection Systems
HP Direct Part Number: FIF-31006
UPC: 812061034906
Fuel Injection Style: Throttle body
Fuel Injection System Type: Single 4-Barrel Throttle Body (4150 Flange)
Maximum Horsepower with Gas: 600
Timing Control Compatible: Yes
ECM Included: Yes
Self Tuning: Yes
User Tunable: Yes
Fuel System Included: Inline pump kit
Fuel Pump Flow Rating (lph): 255
Ignition System Included: None
Power Distribution Included: None
User Interface Included: 4.5 in. display
EGR: No
Transmission Controller Included: No
Metering Style: Speed density
Multi-Port Fuel Rails Included: No
Throttle Body Included: Yes
Throttle Body Mounting Flange: 4-barrel square bore
Venturi Quantity: 4
Throttle Body Material: Cast aluminum
Throttle Body Color: Polished
Injectors Included: Yes
Injector Size (lbs/hr): 80 lbs./hr.
Calibration Module Included: Yes
Wiring Harness Included: Yes
Oxygen Sensor Included: Yes
Fuel Pressure Regulator Included: Yes
MAP Sensor Included: Yes
IAT Sensor Included: Yes
TPS Sensor Included: Yes
IAC Motor Included: Yes
Quantity: Sold as a kit.
Notes: With inline Fuel delivery master kit.