Description
FiTech Go EFI 4 600 hp self-tuning fuel injection systems with G-Surge modules are for off-roaders, racers, and extreme enthusiasts. G-Surge modules are designed to deliver steady fuel flow under extreme conditions. These tough units have major fuel capacity around the pump, are designed to stay air-free (thus eliminating starvation issues), and support up to 600 hp. Stock low-pressure pumps can be used to feed modules.
Go EFI 4 600 hp systems mount the self-adjusting ECU on the throttle body, will fit any 4-barrel manifold, and are designed to support 250 to 600 hp engines. Each system has a hand-held controller with a touchscreen for initial setup, throttle linkage that suits most transmissions, and is manufactured with OE engineering. Whether you're bouncing along, sliding through corners, or in off-camber situations, FiTech Go EFI 4 600 hp self-tuning fuel injection systems with G-Surge modules will get you through.
Additional G-Surge module features:
* Pump is constantly covered in fuel
* Available with single or dual 340 lph (89 gph) fuel pumps
Additional Go EFI 4 600 hp features:
* Can change air/fuel ratios and ignition timing on the fly
* Choice of three fuel inlet connections
* Will work with CDI box, but not required to control timing
* Adjustable fan control switch
* Can be used with an engine-mounted return-less fuel command center
* Uses easy-to-replace, GM-type sensors and Bosch 4.2 wideband oxygen sensors
* Wet flow swirl spray annular discharge obtains complete atomization
* Voltage-controlling fuel pump control reduces power under low loads to lower temperatures
* Systems with mounted ECUs offer spark control without the need for an external spark box or special distributor
* Designed for applications making at least 6 in. of vacuum at idle
* Throttle body is available in tumble polished or satin black finish
Brand: FiTech Fuel Injection
Manufacturer's Part Number: 36001
Part Type: Fuel Injection Systems
Product Line: FiTech Go EFI 4 600 HP Self-Tuning Fuel Injection Systems with G-Surge Modules
HP Direct Part Number: FIF-36001
UPC: 852198008173
Fuel Injection Style: Throttle body
Fuel Injection System Type: Single 4-Barrel Throttle Body (4150 Flange)
Maximum Horsepower with Gas: 600
Timing Control Compatible: Yes
ECM Included: Yes
Self Tuning: Yes
User Tunable: Yes
Fuel System Included: In-tank fuel pump module, return
Ignition System Included: None
Power Distribution Included: None
User Interface Included: 4.5 in. display
EGR: No
Transmission Controller Included: No
Metering Style: Speed density (Map-N) or speed throttle (Alpha-N)
Multi-Port Fuel Rails Included: No
Throttle Body Included: Yes
Throttle Body Mounting Flange: 4-barrel square bore
Venturi Quantity: 4
Venturi Diameter (mm): 44.45mm
Throttle Body Material: Cast aluminum
Throttle Body Color: Polished
Injectors Included: Yes
Calibration Module Included: Yes
Wiring Harness Included: Yes
Oxygen Sensor Included: Yes
Fuel Pressure Regulator Included: Yes
MAP Sensor Included: Yes
IAT Sensor Included: Yes
TPS Sensor Included: Yes
IAC Motor Included: Yes
Quantity: Sold as a kit.
Notes: Includes internally regulated single-pump G-Surge tank.
Go EFI 4 600 hp systems mount the self-adjusting ECU on the throttle body, will fit any 4-barrel manifold, and are designed to support 250 to 600 hp engines. Each system has a hand-held controller with a touchscreen for initial setup, throttle linkage that suits most transmissions, and is manufactured with OE engineering. Whether you're bouncing along, sliding through corners, or in off-camber situations, FiTech Go EFI 4 600 hp self-tuning fuel injection systems with G-Surge modules will get you through.
Additional G-Surge module features:
* Pump is constantly covered in fuel
* Available with single or dual 340 lph (89 gph) fuel pumps
Additional Go EFI 4 600 hp features:
* Can change air/fuel ratios and ignition timing on the fly
* Choice of three fuel inlet connections
* Will work with CDI box, but not required to control timing
* Adjustable fan control switch
* Can be used with an engine-mounted return-less fuel command center
* Uses easy-to-replace, GM-type sensors and Bosch 4.2 wideband oxygen sensors
* Wet flow swirl spray annular discharge obtains complete atomization
* Voltage-controlling fuel pump control reduces power under low loads to lower temperatures
* Systems with mounted ECUs offer spark control without the need for an external spark box or special distributor
* Designed for applications making at least 6 in. of vacuum at idle
* Throttle body is available in tumble polished or satin black finish
Brand: FiTech Fuel Injection
Manufacturer's Part Number: 36001
Part Type: Fuel Injection Systems
Product Line: FiTech Go EFI 4 600 HP Self-Tuning Fuel Injection Systems with G-Surge Modules
HP Direct Part Number: FIF-36001
UPC: 852198008173
Fuel Injection Style: Throttle body
Fuel Injection System Type: Single 4-Barrel Throttle Body (4150 Flange)
Maximum Horsepower with Gas: 600
Timing Control Compatible: Yes
ECM Included: Yes
Self Tuning: Yes
User Tunable: Yes
Fuel System Included: In-tank fuel pump module, return
Ignition System Included: None
Power Distribution Included: None
User Interface Included: 4.5 in. display
EGR: No
Transmission Controller Included: No
Metering Style: Speed density (Map-N) or speed throttle (Alpha-N)
Multi-Port Fuel Rails Included: No
Throttle Body Included: Yes
Throttle Body Mounting Flange: 4-barrel square bore
Venturi Quantity: 4
Venturi Diameter (mm): 44.45mm
Throttle Body Material: Cast aluminum
Throttle Body Color: Polished
Injectors Included: Yes
Calibration Module Included: Yes
Wiring Harness Included: Yes
Oxygen Sensor Included: Yes
Fuel Pressure Regulator Included: Yes
MAP Sensor Included: Yes
IAT Sensor Included: Yes
TPS Sensor Included: Yes
IAC Motor Included: Yes
Quantity: Sold as a kit.
Notes: Includes internally regulated single-pump G-Surge tank.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.