Edelbrock Rollin' Thunder Hydraulic Roller Cam, Lifter, and Pushrod Kits 22815

Make some noise with one of these Edelbrock Rollin' Thunder hydraulic roller cam, lifter, and pushrod kits. They feature a hydraulic roller camshaft and improved hydraulic roller lifters that have more aggressive profiles than conventional cams without excessive valve overlap. They do this by testing and tuning them together on engine dynamometers for maximum performance. There's no guesswork about part compatibility with the Edelbrock Rollin' Thunder hydraulic roller cam and lifter kits, and you can be sure that all of the combinations will perform. Recommended for high performance street and strip use, the Edelbrock Rollin' Thunder hydraulic roller cam and lifter kits work best from 1,500 to 6,500 rpm and they maintain good vacuum at idle.Brand: Edelbrock
Manufacturer's Part Number: 22815
Part Type: Camshaft Kits
Product Line: Edelbrock Rollin' Thunder Hydraulic Roller Cam, Lifter, and Pushrod Kits
HP Direct Part Number: EDL-22815
UPC: 085347228157
Cam Style: Hydraulic roller, Retro-fit
Basic Operating RPM Range: 1,500-6,500
Camshaft Use: Street
Intake Duration at 050 inch Lift: 235
Exhaust Duration at 050 inch Lift: 238
Duration at 050 inch Lift: 235 int./238 exh.
Advertised Intake Duration: 299
Advertised Exhaust Duration: 302
Advertised Duration: 299 int./302 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.573 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.582 in.
Valve Lift with Factory Rocker Arm Ratio: 0.573 int./0.582 exh.
Lobe Separation (degrees): 112
Computer-Controlled Compatible: No
Lifters Included: Yes
Lifter Style: Hydraulic roller
Valve Springs Included: No
Retainers Included: No
Locks Included: No
Valve Stem Seals Included: No
Timing Chain and Gears Included: No
Assembly Lubricant Included: No
Pushrods Included: Yes
Rocker Arms Included: No
Gaskets Included: No
Valve Springs Required: Yes
Quantity: Sold as a kit.