Edelbrock Rollin' Thunder Hydraulic Roller Cam, Lifter, and Pushrod Kits 22096

Make some noise with one of these Edelbrock Rollin' Thunder hydraulic roller cam, lifter, and pushrod kits. They feature a hydraulic roller camshaft and improved hydraulic roller lifters that have more aggressive profiles than conventional cams without excessive valve overlap. They do this by testing and tuning them together on engine dynamometers for maximum performance. There's no guesswork about part compatibility with the Edelbrock Rollin' Thunder hydraulic roller cam and lifter kits, and you can be sure that all of the combinations will perform. Recommended for high performance street and strip use, the Edelbrock Rollin' Thunder hydraulic roller cam and lifter kits work best from 1,500 to 6,500 rpm and they maintain good vacuum at idle.Brand: Edelbrock
Manufacturer's Part Number: 22096
Part Type: Camshaft Kits
Product Line: Edelbrock Rollin' Thunder Hydraulic Roller Cam, Lifter, and Pushrod Kits
HP Direct Part Number: EDL-22096
UPC: 085347220960
Cam Style: Hydraulic roller, OE roller
Basic Operating RPM Range: 1,500-5,500
Camshaft Use: Street
Intake Duration at 050 inch Lift: 212
Exhaust Duration at 050 inch Lift: 222
Duration at 050 inch Lift: 212 int./222 exh.
Advertised Intake Duration: 280
Advertised Exhaust Duration: 290
Advertised Duration: 280 int./290 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.462 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.479 in.
Valve Lift with Factory Rocker Arm Ratio: 0.462 int./0.479 exh.
Lobe Separation (degrees): 112
Camshaft Gear Attachment: 3-bolt
Computer-Controlled Compatible: No
Lifters Included: Yes
Lifter Style: Hydraulic roller
Valve Springs Included: No
Retainers Included: No
Locks Included: No
Valve Stem Seals Included: No
Timing Chain and Gears Included: No
Assembly Lubricant Included: No
Pushrods Included: Yes
Rocker Arms Included: No
Gaskets Included: No
Valve Springs Required: Yes
Quantity: Sold as a kit.