Edelbrock Rollin' Thunder Hydraulic Roller Cam, Lifter, and Pushrod Kits 22076

Make some noise with one of these Edelbrock Rollin' Thunder hydraulic roller cam, lifter, and pushrod kits. They feature a hydraulic roller camshaft and improved hydraulic roller lifters that have more aggressive profiles than conventional cams without excessive valve overlap. They do this by testing and tuning them together on engine dynamometers for maximum performance. There's no guesswork about part compatibility with the Edelbrock Rollin' Thunder hydraulic roller cam and lifter kits, and you can be sure that all of the combinations will perform. Recommended for high performance street and strip use, the Edelbrock Rollin' Thunder hydraulic roller cam and lifter kits work best from 1,500 to 6,500 rpm and they maintain good vacuum at idle.Brand: Edelbrock
Manufacturer's Part Number: 22076
Part Type: Camshaft Kits
Product Line: Edelbrock Rollin' Thunder Hydraulic Roller Cam, Lifter, and Pushrod Kits
HP Direct Part Number: EDL-22076
UPC: 085347220762
Cam Style: Hydraulic roller, OE roller
Basic Operating RPM Range: 1,500-6,500
Camshaft Use: Street
Intake Duration at 050 inch Lift: 242
Exhaust Duration at 050 inch Lift: 240
Duration at 050 inch Lift: 242 int./240 exh.
Advertised Intake Duration: 305
Advertised Exhaust Duration: 314
Advertised Duration: 305 int./314 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.594 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.594 in.
Valve Lift with Factory Rocker Arm Ratio: 0.594 int./0.594 exh.
Lobe Separation (degrees): 112
Camshaft Gear Attachment: 3-bolt
Computer-Controlled Compatible: No
Lifters Included: Yes
Lifter Style: Hydraulic roller
Valve Springs Included: No
Retainers Included: No
Locks Included: No
Valve Stem Seals Included: No
Timing Chain and Gears Included: No
Assembly Lubricant Included: No
Pushrods Included: Yes
Rocker Arms Included: No
Gaskets Included: No
Valve Springs Required: Yes
Quantity: Sold as a kit.