COMP Cams Xtreme Marine Retrofit Cam and Lifter Kits CL12-418-8

Give your boat an Xtreme setup! COMP Cams Xtreme marine retrofit cam and lifter kits are designed to take advantage of the newest developments in camshaft design and to provide maximum performance. Their aggressive lobe design produces better throttle response and top-end horsepower than other systems with the same duration at .050 in., while delivering increased engine vacuum. These kits are available for everything from pleasure boats to race applications, so you can always have Xtreme performance on the water.Brand: COMP Cams
Manufacturer's Part Number: CL12-418-8
Part Type: Camshaft Kits
Product Line: COMP Cams Xtreme Marine Retrofit Cam and Lifter Kits
HP Direct Part Number: CCA-CL12-418-8
UPC: 036584041610
Cam Style: Hydraulic roller, Retro-fit
Basic Operating RPM Range: 1,800-5,800
Camshaft Use: Marine
Camshaft Manufacturers Description: Good for jet with a impeller. Strong mid-range power. Needs good exhaust
Intake Duration at 050 inch Lift: 224
Exhaust Duration at 050 inch Lift: 230
Duration at 050 inch Lift: 224 int./230 exh.
Advertised Intake Duration: 276
Advertised Exhaust Duration: 282
Advertised Duration: 276 int./282 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.503 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.510 in.
Valve Lift with Factory Rocker Arm Ratio: 0.503 int./0.510 exh.
Lobe Separation (degrees): 112
Grind Number: XM276HR
Computer-Controlled Compatible: No
Lifters Included: Yes
Lifter Style: Hydraulic roller
Valve Springs Included: No
Retainers Included: No
Locks Included: No
Valve Stem Seals Included: No
Timing Chain and Gears Included: No
Assembly Lubricant Included: Yes
Pushrods Included: No
Rocker Arms Included: No
Gaskets Included: No
Valve Springs Required: Yes
Quantity: Sold as a kit.
Notes: Requires thrust button and wear plate. Must use bronze tip fuel pump pushrod when using high-pressure or high-volume pump. Stock springs cannot be used.