COMP Cams Nitrous HP Cam and Lifter Kits SK12-556-4

COMP Cams Nitrous HP cam and lifter kits are designed to work with your nitrous system to get more power from your engine. The unique intake cam lobes allow your engine cylinders to fill better for more complete combustion. While, the exhaust lobes are spread to decrease overlap and ensure maximum scavenging of your combustion chamber. The bottom line is an increased power boost from your nitrous system, without any loss of throttle response or torque in street applications.Brand: COMP Cams
Manufacturer's Part Number: SK12-556-4
Part Type: Camshaft Kits
Product Line: COMP Cams Nitrous HP Cam and Lifter Kits
HP Direct Part Number: CCA-SK12-556-4
UPC: 036584024163
Cam Style: Hydraulic flat tappet
Basic Operating RPM Range: 1,600-5,900
Camshaft Use: Street/Strip
Intake Duration at 050 inch Lift: 218
Exhaust Duration at 050 inch Lift: 230
Duration at 050 inch Lift: 218 int./230 exh.
Advertised Intake Duration: 262
Advertised Exhaust Duration: 280
Advertised Duration: 262 int./280 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.462 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.480 in.
Valve Lift with Factory Rocker Arm Ratio: 0.462 int./0.480 exh.
Lobe Separation (degrees): 113
Grind Number: CS NX262H-13
Computer-Controlled Compatible: No
Lifters Included: Yes
Lifter Style: Hydraulic flat tappet
Valve Springs Included: No
Retainers Included: No
Locks Included: No
Valve Stem Seals Included: No
Timing Chain and Gears Included: Yes
Timing Chain Style: Double non-roller
Assembly Lubricant Included: Yes
Pushrods Included: No
Rocker Arms Included: No
Gaskets Included: No
Valve Springs Required: Yes
Quantity: Sold as a kit.
Notes: Recommended for use with nitrous systems of 100 to 150 HP shot or a small supercharger.