COMP Cams Nitrous HP Cam and Lifter Kits SK11-572-4

COMP Cams Nitrous HP cam and lifter kits are designed to work with your nitrous system to get more power from your engine. The unique intake cam lobes allow your engine cylinders to fill better for more complete combustion. While, the exhaust lobes are spread to decrease overlap and ensure maximum scavenging of your combustion chamber. The bottom line is an increased power boost from your nitrous system, without any loss of throttle response or torque in street applications.Brand: COMP Cams
Manufacturer's Part Number: SK11-572-4
Part Type: Camshaft Kits
Product Line: COMP Cams Nitrous HP Cam and Lifter Kits
HP Direct Part Number: CCA-SK11-572-4
UPC: 036584040187
Cam Style: Hydraulic flat tappet
Basic Operating RPM Range: 2,800-7,000
Camshaft Use: Street/Strip
Intake Duration at 050 inch Lift: 250
Exhaust Duration at 050 inch Lift: 264
Duration at 050 inch Lift: 250 int./264 exh.
Advertised Intake Duration: 294
Advertised Exhaust Duration: 316
Advertised Duration: 294 int./316 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.588 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.600 in.
Valve Lift with Factory Rocker Arm Ratio: 0.588 int./0.600 exh.
Lobe Separation (degrees): 113
Camshaft Gear Attachment: 3-bolt
Grind Number: NX294H
Computer-Controlled Compatible: No
Lifters Included: Yes
Lifter Style: Hydraulic flat tappet
Valve Springs Included: No
Retainers Included: No
Locks Included: No
Valve Stem Seals Included: No
Timing Chain and Gears Included: Yes
Assembly Lubricant Included: Yes
Pushrods Included: No
Rocker Arms Included: No
Gaskets Included: No
Valve Springs Required: No
Quantity: Sold as a kit.
Notes: Camshaft does not feature oiling groove in rear journal for use 1965-66 models. Designed for multi-stage nitrous kits or 8-71 blower. After market heads, intake, gears, and 3,500 stall torque converter recommended.