COMP Cams Magnum Hydraulic Roller Cam and Lifter Kits CL35-440-8

COMP Cams Magnum hydraulic roller cam and lifter kits are designed for everyone, from the serious street performance enthusiast to the all-out competition drag racer. Whether you're driving a street rod, show car with power accessories, a super gas, or super competition car on alcohol, one of these cam kits will fit your engine's needs.Brand: COMP Cams
Manufacturer's Part Number: CL35-440-8
Part Type: Camshaft Kits
Product Line: COMP Cams Magnum Hydraulic Roller Cam and Lifter Kits
HP Direct Part Number: CCA-CL35-440-8
UPC: 036584033851
Cam Style: Hydraulic roller, OE roller
Basic Operating RPM Range: 2,000-5,500
Camshaft Use: Street/Strip
Camshaft Manufacturers Description: Great in street machines. Best power above 3500 rpm but still good torque. Mild rough idle. Largest for stock heads and intake. 2000+ stall recommended.
Intake Duration at 050 inch Lift: 220
Exhaust Duration at 050 inch Lift: 220
Duration at 050 inch Lift: 220 int./220 exh.
Advertised Intake Duration: 281
Advertised Exhaust Duration: 281
Advertised Duration: 281 int./281 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.512 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.512 in.
Valve Lift with Factory Rocker Arm Ratio: 0.512 int./0.512 exh.
Lobe Separation (degrees): 110
Grind Number: 281HR
Computer-Controlled Compatible: No
Lifters Included: Yes
Lifter Style: Hydraulic roller
Valve Springs Included: No
Retainers Included: No
Locks Included: No
Valve Stem Seals Included: No
Timing Chain and Gears Included: No
Assembly Lubricant Included: Yes
Pushrods Included: No
Rocker Arms Included: No
Gaskets Included: No
Valve Springs Required: Yes
Quantity: Sold as a kit.
Notes: For carbureted engines only, equipped with hydraulic roller cams. Stock valve springs cannot be used with this application.