COMP Cams Magnum Hydraulic Cam and Lifter Kits SK34-337-4

Designed for hot street/strip cars, COMP Cams Magnum Series cam and lifter kits require a higher compression ratio, rear-end gear ratio, and stall torque converter than stock. With a very aggressive profile, these Magnum hydraulic cam and lifter kits provide maximum top-end performance for your high performance car.Brand: COMP Cams
Manufacturer's Part Number: SK34-337-4
Part Type: Camshaft Kits
Product Line: COMP Cams Magnum Hydraulic Cam and Lifter Kits
HP Direct Part Number: CCA-SK34-337-4
UPC: 036584471394
Cam Style: Hydraulic flat tappet
Basic Operating RPM Range: 3,000-6,800
Camshaft Use: Street/Strip
Intake Duration at 050 inch Lift: 253
Exhaust Duration at 050 inch Lift: 253
Duration at 050 inch Lift: 253 int./253 exh.
Advertised Intake Duration: 305
Advertised Exhaust Duration: 305
Advertised Duration: 305 int./305 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.585 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.585 in.
Valve Lift with Factory Rocker Arm Ratio: 0.585 int./0.585 exh.
Lobe Separation (degrees): 110
Grind Number: FF 305H-10
Computer-Controlled Compatible: No
Lifters Included: Yes
Lifter Style: Hydraulic flat tappet
Valve Springs Included: No
Retainers Included: No
Locks Included: No
Valve Stem Seals Included: No
Timing Chain and Gears Included: Yes
Timing Chain Style: Double non-roller
Assembly Lubricant Included: Yes
Pushrods Included: No
Rocker Arms Included: No
Gaskets Included: No
Valve Springs Required: Yes
Quantity: Sold as a kit.