COMP Cams Magnum Hydraulic Cam and Lifter Kits CL22-131-6

Designed for hot street/strip cars, COMP Cams Magnum Series cam and lifter kits require a higher compression ratio, rear-end gear ratio, and stall torque converter than stock. With a very aggressive profile, these Magnum hydraulic cam and lifter kits provide maximum top-end performance for your high performance car.Brand: COMP Cams
Manufacturer's Part Number: CL22-131-6
Part Type: Camshaft Kits
Product Line: COMP Cams Magnum Hydraulic Cam and Lifter Kits
HP Direct Part Number: CCA-CL22-131-6
UPC: 036584191728
Cam Style: Hydraulic flat tappet
Basic Operating RPM Range: 1,800-5,500
Camshaft Use: Street/Strip
Camshaft Manufacturers Description: Best cam for performance usage. Slight chop at idle.
Intake Duration at 050 inch Lift: 234
Exhaust Duration at 050 inch Lift: 234
Duration at 050 inch Lift: 234 int./234 exh.
Advertised Intake Duration: 280
Advertised Exhaust Duration: 280
Advertised Duration: 280 int./280 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.460 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.460 in.
Valve Lift with Factory Rocker Arm Ratio: 0.460 int./0.460 exh.
Lobe Separation (degrees): 108
Grind Number: 280H
Computer-Controlled Compatible: No
Lifters Included: Yes
Lifter Style: Hydraulic flat tappet
Valve Springs Included: No
Retainers Included: No
Locks Included: No
Valve Stem Seals Included: No
Timing Chain and Gears Included: No
Assembly Lubricant Included: Yes
Pushrods Included: No
Rocker Arms Included: No
Gaskets Included: No
Valve Springs Required: No
Quantity: Sold as a kit.