COMP Cams Magnum Hydraulic Cam and Lifter Kits CL09-435-8

Designed for hot street/strip cars, COMP Cams Magnum Series cam and lifter kits require a higher compression ratio, rear-end gear ratio, and stall torque converter than stock. With a very aggressive profile, these Magnum hydraulic cam and lifter kits provide maximum top-end performance for your high performance car.Brand: COMP Cams
Manufacturer's Part Number: CL09-435-8
Part Type: Camshaft Kits
Product Line: COMP Cams Magnum Hydraulic Cam and Lifter Kits
HP Direct Part Number: CCA-CL09-435-8
UPC: 036584194644
Cam Style: Hydraulic roller, OE roller
Basic Operating RPM Range: 1,000-4,300
Camshaft Use: Street/Strip
Intake Duration at 050 inch Lift: 200
Exhaust Duration at 050 inch Lift: 206
Duration at 050 inch Lift: 200 int./206 exh.
Advertised Intake Duration: 251
Advertised Exhaust Duration: 257
Advertised Duration: 251 int./257 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.428 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.459 in.
Valve Lift with Factory Rocker Arm Ratio: 0.428 int./0.459 exh.
Lobe Separation (degrees): 114
Grind Number: 251HR
Computer-Controlled Compatible: Yes
Lifters Included: Yes
Lifter Style: Hydraulic roller
Valve Springs Included: No
Retainers Included: No
Locks Included: No
Valve Stem Seals Included: No
Timing Chain and Gears Included: No
Assembly Lubricant Included: Yes
Pushrods Included: No
Rocker Arms Included: No
Gaskets Included: No
Valve Springs Required: Yes
Quantity: Sold as a kit.
Notes: Fits non-balance shaft engines only.