COMP Cams HRT Stage 3 Camshafts CK201-306-17

COMP Cams HRT Stage 3 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles engineered to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. COMP Cams HRT Stage 3 cams receive the Micro Surface Enhancement (MSE) finishing process as a standard feature to increase strength and performance by reducing surface peak roughness. This also provides noticeable improvement in the effective load bearing area, thus allowing for much higher loads. Order the model recommended for your vehicle and engine application.

Brand: COMP Cams
Manufacturer's Part Number: CK201-306-17
Part Type: Camshaft Kits
Product Line: COMP Cams HRT Stage 3 Camshafts
HP Direct Part Number: CCA-CK201-306-17
UPC: 036584405382
Cam Style: Hydraulic roller, OE roller
Basic Operating RPM Range: 2,100-7,400
Camshaft Use: Street/Strip
Camshaft Manufacturers Description: Gains in mid-range torque and drastic power increase at high RPM. Works best with ported heads, stroker cranks and other modifications.
Intake Duration at 050 inch Lift: 228
Exhaust Duration at 050 inch Lift: 236
Duration at 050 inch Lift: 228 int./236 exh.
Advertised Intake Duration: 281
Advertised Exhaust Duration: 284
Advertised Duration: 281 int./284 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.632 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.609 in.
Valve Lift with Factory Rocker Arm Ratio: 0.632 int./0.609 exh.
Lobe Separation (degrees): 117.5
Computer-Controlled Compatible: Yes
Lifters Included: No
Valve Springs Included: Yes
Valve Spring Style: Conical
Outside Diameter of Outer Spring (in.): 1.332 in.
Retainers Included: Yes
Locks Included: Yes
Valve Stem Seals Included: Yes
Timing Chain and Gears Included: No
Assembly Lubricant Included: No
Pushrods Included: Yes
Intake Overall Length (in.): 6.800 in.
Exhaust Overall Length (in.): 8.100 in.
Rocker Arms Included: No
Gaskets Included: No
Valve Springs Required: No
Quantity: Sold as a kit.
Notes: Fits engines with VVT. Requires the use of phaser limiter CCA-5761 or phaser lock kit CCA-5760. Custom tuning is required. The MDS system must be disabled and must be used with non MDS lifters.