Description
COMP Cams HRT Stage 2 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles designed to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. These new HRT camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250 percent improvement in the effective load bearing area, allowing for much higher loads.Brand: COMP Cams
Manufacturer's Part Number: CK201-303-17
Part Type: Camshaft Kits
Product Line: COMP Cams HRT Stage 2 Camshafts
HP Direct Part Number: CCA-CK201-303-17
UPC: 036584405306
Cam Style: Hydraulic roller, OE roller
Basic Operating RPM Range: 1,900-7,000
Camshaft Use: Street/Strip
Camshaft Manufacturers Description: Best average torque and power of any sub .600 in. lift Gen IV HEMI cam tested. Runs great from 2500-6500 RPM.
Intake Duration at 050 inch Lift: 220
Exhaust Duration at 050 inch Lift: 230
Duration at 050 inch Lift: 220 int./230 exh.
Advertised Intake Duration: 273
Advertised Exhaust Duration: 279
Advertised Duration: 273 int./279 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.596 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.582 in.
Valve Lift with Factory Rocker Arm Ratio: 0.596 int./0.582 exh.
Lobe Separation (degrees): 114
Grind Number: LST273HR14
Computer-Controlled Compatible: Yes
Lifters Included: No
Valve Springs Included: Yes
Valve Spring Style: Beehive
Outside Diameter of Outer Spring (in.): 1.310 in.
Retainers Included: Yes
Locks Included: Yes
Valve Stem Seals Included: Yes
Timing Chain and Gears Included: No
Assembly Lubricant Included: No
Pushrods Included: Yes
Intake Overall Length (in.): 6.800 in.
Exhaust Overall Length (in.): 8.100 in.
Rocker Arms Included: No
Gaskets Included: No
Valve Springs Required: No
Quantity: Sold as a kit.
Notes: Fits engines with VVT. Requires the use of phaser limiter CCA-5761 or phaser lock kit CCA-5760. Custom tuning is required. The MDS system must be disabled and must be used with non MDS lifters.
Manufacturer's Part Number: CK201-303-17
Part Type: Camshaft Kits
Product Line: COMP Cams HRT Stage 2 Camshafts
HP Direct Part Number: CCA-CK201-303-17
UPC: 036584405306
Cam Style: Hydraulic roller, OE roller
Basic Operating RPM Range: 1,900-7,000
Camshaft Use: Street/Strip
Camshaft Manufacturers Description: Best average torque and power of any sub .600 in. lift Gen IV HEMI cam tested. Runs great from 2500-6500 RPM.
Intake Duration at 050 inch Lift: 220
Exhaust Duration at 050 inch Lift: 230
Duration at 050 inch Lift: 220 int./230 exh.
Advertised Intake Duration: 273
Advertised Exhaust Duration: 279
Advertised Duration: 273 int./279 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.596 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.582 in.
Valve Lift with Factory Rocker Arm Ratio: 0.596 int./0.582 exh.
Lobe Separation (degrees): 114
Grind Number: LST273HR14
Computer-Controlled Compatible: Yes
Lifters Included: No
Valve Springs Included: Yes
Valve Spring Style: Beehive
Outside Diameter of Outer Spring (in.): 1.310 in.
Retainers Included: Yes
Locks Included: Yes
Valve Stem Seals Included: Yes
Timing Chain and Gears Included: No
Assembly Lubricant Included: No
Pushrods Included: Yes
Intake Overall Length (in.): 6.800 in.
Exhaust Overall Length (in.): 8.100 in.
Rocker Arms Included: No
Gaskets Included: No
Valve Springs Required: No
Quantity: Sold as a kit.
Notes: Fits engines with VVT. Requires the use of phaser limiter CCA-5761 or phaser lock kit CCA-5760. Custom tuning is required. The MDS system must be disabled and must be used with non MDS lifters.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.